Movement detector/switch actuator

With select lens for detection with animal access. For automatic switching of actuators dependent on movement and brightness. Switch-off delay of the actuator can be programmed via the web interface of the System Access Point. For switching 127 V~/230 V~ consumers. With integrated switch actuator. Switching function is available also without prior programming (pre-configured). Configuration can be changed later via the web interface (groups, scenes, etc.). The bus can be connected via enclosed terminal block. When installing in the flush-mounted box, a spatial division between the bus cable and 127 V/230 V installation cable is to be adhered to! If this minimum distance is not possible, use electronic boxes or insulating tubes

ویژگی ها

Outputs: 1 x Normally open contact, potential free

Suitable for: ohmic

Rated current: 10 A

Rated power: 2300 W

Suitable for: capacitive

Rated current: 10 AX

Protection class of device: IP 20

Mounting depth: 32 mm

Dimensions (H × W × D): 71 mm × ۷۱ mm × ۴۵ mm